Thiết bị SWITCH JUNIPER EX2200-48P-4G

Thiết bị SWITCH JUNIPER EX2200-48P-4G

còn hàng

Mã sản phẩm : EX2200-48P-4G

Thông số sản phẩm SWITCH JUNIPER EX2200-48P-4G

– Kích thước (W x H x D): Chiều rộng: 17,4 in (44,1 cm) x Chiều cao: 1,75 in (4,45 cm) x Độ sâu: 10 in (25,43 cm)

– Trọng lượng 8 lb (3,6 kg)

– Tùy chọn nguồn 76 W AC

– DRAM 512 MB

– Flash 1 GB

– CPU ARM 800 MHz CPU

– Mật độ cổng GbE trên mỗi hệ thống 52 (48 cổng máy chủ + đường lên GbE bốn cổng)


BẢO HÀNH: 12 THÁNG

(*) GIAO HÀNG HỎA TỐC NỘI THÀNH 1H



Mô tả

SWITCH JUNIPER EX2200-48P-4G 48 Ports 10/100/1000BASE-T Ethernet Switch with 4 GE SFP Uplink Ports

Thiết bị chuyển mạch Switch Juniper EX2200-48T-4G là một sản phẩm nổi bật của dòng Switch Juniper EX2200. EX2200-48T-4G được thiết kế để chạy trong một văn phòng nhỏ / chi nhánh được gắn trong một rack tường với các tính năng hướng đến sự hoàn hảo, tối ưu hóa chi phí cho doanh nghiệp.

 EX2200-48T-4G Switch Juniper 48 Ports Data 4 SFP Slot

Switch Juniper EX2200-48P-4G 48 Port này cũng hỗ trợ nhiều encapsulations bao gồm L2, L3 VLAN và (LACP) giao diện tổng hợp. Thiết bị này còn hỗ trợ chuyển mạch tốc độ dây dẫn tại 104Gbs, hơn 1000 VLAN, multicast và các chức năng mạng tiên tiến.

SWITCH JUNIPER EX2200-48P-4G cũng cung cấp chức năng tường lửa tiên tiến không quốc tịch. Bạn có thể chỉ định điều khiển băng thông và xếp hàng giao thông và ưu tiên – điều này có nghĩa là VoIP và các loại chuyên ngành khác của giao thông có thể dễ dàng thích nghi.

EX2200-48T-4G - phân phối switch juniper, router juniper

Juniper EX2200-48T-4G Switch hỗ trợ sFlow cho phép giám sát hoạt động chi tiết của giao thông để đảm bảo rằng mạng của bạn đang hoạt động với hiệu suất tối đa, và bất kỳ sẽ xảy ra, vấn đề một cách nhanh chóng có thể được cô lập và giải quyết.

 

|| Bạn đang cần tư vấn giải pháp và thiết bị mạng phù hợp. Đừng ngại liên hệ ngay cho NetworkPro:

HOTLINE: 0908 314 585

 

SWITCH JUNIPER EX2200-48P-4G
SWITCH JUNIPER EX2200-48P-4G

THÔNG SỐ KỸ THUẬT

Physical Specifications
Dimensions (W x H x D) • Width: 17.4 in (44.1 cm) for desktop installations 17.5 in (44.6 cm) with rack-mount brackets 
• Height: 1.75 in (4.45 cm) for 1U installations 
• Depth: 10 in (25.43 cm)
Weight 10 lb (4.5 kg)
Environmental Ranges • Operating temperature: 32° to 113° F (0° to 45° C) 
• Storage temperature: -40° to 158° F (-40° to 70° C) 
• Operating altitude: up to 10,000 ft (3,048 m) 
• Non-operating altitude: up to 16,000 ft (4,877 m) 
• Relative humidity operating: 10% to 85% (noncondensing) 
• Relative humidity non-operating: 0% to 95% (noncondensing)
Power Options 91 W AC
Total PoE Power Budget 405 W
Hardware Specifications
Switching Engine Model Store and forward
DRAM 512 MB
Flash 1 GB
CPU 800 MHz ARM CPU
GbE port density per system 52 (48 host ports+ four-port GbE uplinks)
Physical Layer • Physical port redundancy: Redundant Trunk Group (RTG) 
• Time-domain reflectometry (TDR) for detecting cable breaks and shorts 
• Auto MDI/MDIX (medium-dependent interface/mediumdependent interface crossover) support 
• Port speed downshift/setting maximum advertised speed on 10/100/1000BASE-T ports 
• Digital optical monitoring for optical ports
Packet Switching Capacities 104 Gbps
Layer 2 Throughput (Mpps)  77.4 Mpps (wire speed)
Layer 2 Switching • Maximum MAC addresses in hardware: 16,000 
• Jumbo frames: 9216 bytes 
• Number of VLANs: 1,024 (VLAN IDs: 4,096) 
• Port-based VLAN 
• MAC-based VLAN 
• Voice VLAN 
• Private VLAN (PVLAN) 
• IEEE 802.1ak: Multiple VLAN Registration Protocol (MVRP) 
• Multicast VLAN Registration (MVR) 
• Compatible with Per-VLAN Spanning Tree Plus (PVST+) 
• RVI (Routed VLAN Interface) 
• IEEE 802.1AB: Link Layer Discovery Protocol (LLDP) 
• LLDP-MED with VoIP integration 
• IEEE 802.1D: Spanning Tree Protocol 
• IEEE 802.1p: CoS prioritization 
• IEEE 802.1Q: VLAN tagging 
• IEEE 802.1Q-in-Q: VLAN Stacking 
• IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)
• Number of MST instances supported: 64 
• IEEE 802.1w: Rapid Spanning Tree Protocol (RSTP) 
• IEEE 802.1X: Port Access Control 
• IEEE 802.3: 10BASE-T 
• IEEE 802.3u: 100BASE-T 
• IEEE 802.3ab: 1000BASE-T 
• IEEE 802.3z: 1000BASE-X 
• IEEE 802.3x: Pause Frames/Flow Control 
• IEEE 802.3ad: Link Aggregation Control Protocol (LACP) 
• IEEE 802.3ah: Ethernet in the First Mile 
• IEEE 802.1ag: Connectivity Fault Management (CFM) 
• G.8032 (Ethernet Ring Protection)
Layer 3 Features: IPv4 • Maximum number of Address Resolution Protocol (ARP) entries: 2,000 
• Maximum number of IPv4 unicast routes in hardware: 6500 
• Routing protocols: 
• RIP v1/v2 
• OSPF v1/v2 (with 4 active interfaces) 
• Static routing 
• Bidirectional Forwarding Detection (BFD) 
• IP directed broadcast • VRF-Lite
Layer 3 Features: IPv6 Management Functionality • Neighbor discovery, Syslog, Telnet, SSH, J-Web, SNMP, NTP, DNS 
• Static routing
Security • MAC limiting 
• Allowed MAC addresses—configurable per port 
• Sticky MAC (persistent MAC address learning) 
• Dynamic ARP inspection (DAI) 
• Proxy ARP 
• Static ARP support 
• DHCP snooping 
• IP source guard 
• 802.1X port-based 
• 802.1X multiple supplicants 
• 802.1X with VLAN assignment 
• 802.1X with authentication bypass access (based on host MAC address) 
• 802.1X with VoIP VLAN support 
• 802.1X dynamic ACL based on RADIUS attributes 
• 802.1X Supported EAP types: Message Digest 5 (MD5), Transport Layer Security (TLS), Tunneled Transport Layer Security (TTLS), Protected Extensible Authentication Protocol (PEAP) 
• Captive Portal 
• Trusted Network Connect (TNC) certified 
• Static MAC authentication 
• MAC-RADIUS 
• Control plane DoS protection 
• Fallback Authentication
Access control lists (ACLs) (Junos OS firewall filters) • Port-based ACL (PACL)—ingress 
• VLAN-based ACL (VACL)—ingress and egress 
• Router-based ACL (RACL)—ingress and egress 
• ACL entries (ACE) in hardware per system: 1,500 
• ACL counter for denied packets 
• ACL counter for permitted packets 
• Ability to add/remove/change ACL entries in middle of list (ACL editing) 
• L2-L4 ACL
High Availability • External redundant power system (RPS) option 
• Link Aggregation 
• 802.3ad (LACP) support: 
– Number of LAGs supported: 32 
– Maximum number of ports per LAG: 8 
• LAG load sharing algorithm—Bridged Unicast Traffic: 
– IP: S/D MAC, S/D IP 
– TCP/UDP: S/D MAC, S/D IP, S/D Port 
– Non-IP: S/D MAC 
• LAG sharing algorithm—Routed Unicast Traffic: 
– IP: S/D IP 
– TCP/UDP: S/D IP, S/D Port 
• LAG load sharing algorithm—Bridged Multicast Traffic: 
– IP: S/D MAC, S/D IP 
– TCP/UDP: S/D MAC, S/D IP, S/D Port 
– Non-IP: S/D MAC 
• LAG sharing algorithm—Routed Multicast Traffic: 
– IP: S/D IP 
– TCP/UDP: S/D IP, S/D Port 
• Tagged ports support in LAG 
• Uplink Failure Detection (UFD)
Quality of Service (QoS) • Layer 2 QoS 
• Layer 3 QoS 
• Ingress policing: 1 rate 2 color 
• Hardware queues per port: 8 
• Scheduling methods (egress): Strict Priority (SP), shaped deficit weighted round-robin (SDWRR) 
• 802.1p, DSCP /IP precedence trust and marking 
• L2-L4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DSCP/IP precedence, TCP/UDP port numbers 
• Congestion avoidance capabilities: Tail drop
Multicast • IGMP snooping entries: 1,000 
• IGMP: v1, v2, v3 
• IGMP snooping 
• PIM-SM, PIM-SSM, PIM-DM
Safety Certifications • UL-UL60950-1 (Second Edition) 
• C-UL to CAN/CSA 22.2 No.60950-1 (Second Edition) 
• TUV/GS to EN 60950-1 (Second Edition) 
• CB-IEC60950-1 (Second Edition with all country deviations) 
• EN 60825-1 (Second Edition)
Electromagnetic Compatibility Certifications • FCC 47CFR Part 15 Class A 
• EN 55022 Class A 
• ICES-003 Class A 
• VCCI Class A 
• AS/NZS CISPR 22 Class A 
• CISPR 22 Class A 
• EN 55024 
• EN 300386 
• CE
NEBS • GR-63-Core: NEBS, Physical Protection 
• GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment 
• All models except EX2200-24P-4G, EX2200-48P-4G and EX2200-24T-4G-DC
Acoustic Noise in DBA 38.1

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Thiết bị SWITCH JUNIPER EX2200-48P-4G”
x