Thiết bị Switch JUNIPER EX4200-24T-TAA

Thiết bị Switch JUNIPER EX4200-24T-TAA

còn hàng

Mã sản phẩm :EX4200-24T-TAA

Thông số sản phẩm Switch Juniper EX4200-24T-TAA

Hãng: Juniper

Mã sản phẩm: EX4200-24T-TAA

Kích thước: (W x H x D) 17,4 x 1,72 x 13,8 in (44,2 x 4,4 x 35 cm)

Bảng nối đa năng 160 Gbps (có cổng QSFP +) hoặc 80 Gbps (có cổng SFP +) Kết nối khung gầm ảo để liên kết tối đa 10 thiết bị chuyển mạch như một thiết bị logic duy nhất

Đường lên cố định 4 cổng có thể được cấu hình riêng lẻ như cổng GbE (SFP) hoặc 10GbE (SFP +); Cổng 2 x 40G QSFP +

Nguồn cung cấp AC 150 W: 1,43 lb (0,65 kg)

Nguồn cung cấp AC 600 W: 1,82 lb (0,83 kg)

Nguồn điện xoay chiều 920 W: 1,87 lb (0,85 kg)

Cung cấp năng lượng 150 W DC: 1,43 lb (0,65 kg)

Mô-đun quạt: 0,16 lb (0,07 kg)

Thông số phần cứng: DRAM 2 GB với ECC, Flash 2 GB, CPU lõi kép 1 GHz

Mật độ cổng GbE trên mỗi hệ thống: 24 cổng máy chủ + bốn cổng 1/10 GbE và hai cổng đường lên 40GbE

Hỗ trợ giao diện phụ thuộc trung bình tự động / giao diện phụ thuộc trung bình (MDI / MDIX)

Giảm tốc độ cổng / cài đặt tốc độ tối đa được quảng cáo trên các cổng 10/100 / 1000BASE-T

Giám sát quang kỹ thuật số cho các cổng quang

Dung lượng chuyển mạch gói (Tối đa với gói 64 byte) 288 Gbps

BẢO HÀNH: 12 THÁNG

(*) GIAO HÀNG HỎA TỐC NỘI THÀNH 1H



Mô tả

Switch Juniper EX4200-24T-TAA 24-port 1000BaseX SFP + 320W AC PS tại NetworkPro.vn

Bộ chuyển mạch Juniper Switch EX4200-24T-TAA với công nghệ Virtual Chassis kết hợp sự sẵn có và độ tin cậy của hệ thống mô-đun linh hoạt, có thể xếp chồng, cung cấp một hiệu suất cao, khả năng mở rộng và hiện đang là giải pháp hữu ích sử dụng trong các hệ thống trung tâm dữ liệu và môi trường khuôn viên trường.

 

|| Bạn đang cần tư vấn giải pháp và thiết bị mạng phù hợp. Đừng ngại liên hệ ngay cho NetworkPro:

HOTLINE: 0908 314 585

Thông số kỹ thuật Switch Juniper EX4200-24T

Physical Specifications
Dimensions (W x H x D) • Backplane: 128 Gbps Virtual Chassis interconnect to combine up to 10 units as a single logical device 
• Uplink module options: 
– 4-port GbE module with pluggable SFP optics 
– 2-port 10GbE module with pluggable XFP optics 
– Dual-mode 2-port 10GbE SFP+ / 4-port GbE SFP module with pluggable SFP+/SFP optics 
– Dual-mode 2-port 10GbE SFP+ / 4-port GbE SFP module with pluggable SFP+/SFP optics and MACsec support
Power Options • Power supplies: Autosensing; 100-120 V / 200-240 V; AC 320 W, 600 W and 930 W dual load-sharing hotswappable internal redundant power supplies 
• Maximum current inrush: 50 amps 
• DC power supply: 190 W DC, input voltage range 36 V – 72 V, dual input feed, dual load-sharing hot-swappable internal redundant power supplies 
• Minimum number of PSUs required for fully loaded chassis: 1 per switch
Dimensions (W x H x D) • 17.41 x 1.72 x 16.43 in (44.21 x 4.32 x 41.73 cm) 
• Desktop installation width noted above, rack-mount width is 17.5 in (44.5 cm) 
• Height: 1 RU 
• Depth with 320 W AC PSU and 190 W DC PSU noted above, 18.8 in (47.8 cm) with 600/930 W AC PSU
System Weight 16.5 lb (7.5 kg)
Environmental Ranges • Operating temperature: 32° to 113° F (0° to 45° C) 
• Storage temperature: -40° to 158° F (-40° to 70° C) 
• Operating altitude: up to 10,000 ft (3,049 m) 
• Non-operating altitude: up to 16,000 ft (4,877 m) 
• Relative humidity operating: 10% to 85% (noncondensing) 
• Relative humidity non-operating: 0% to 95% (noncondensing)
Cooling • Field-replaceable fan tray with multiple blowers (3) 
• Switch remains operational even if one blower fails 
• Airflow: 20.3 cfm
Hardware Specifications
Switching Engine Model Store and forward
DRAM 1 GB with ECC
Flash 1 GB
CPU 1 GHz PowerPC CPU
GbE port density per system 24 host ports + four 1/10 GbE
Physical Layer • Time Domain Reflectometry (TDR) for detecting cable breaks and shorts: 24P/24T and 48P/48T only 
• Auto MDI/MDIX support: 24P/24T and 48P/48T only (all ports) 
• Port speed downshift/setting max advertised speed on 10/100/1000BASE-T ports: 24P/24T and 48P/48T only, on all ports 
• Digital optical monitoring for optical ports
Packet-Switching Capacities (Maximum with 64-Byte Packets) 88 Gbps
Aggregate Switch Capacities (Maximum with 64 Byte Packets) 216 Gbps
Software Specifications
Layer 2/Layer 3 Throughput (Mpps) (Maximum with 64 Byte Packets) 65 Mpps (wire speed)
Layer 2 Features • Max MAC addresses per system: 32,000 
• Jumbo frames: 9216 Bytes 
• Number of VLANs: 4,096 
• VST instances: 253 
• Port-based VLAN 
• MAC-based VLAN 
• GVRP 
• Voice VLAN 
• Physical port redundancy: Redundant trunk group (RTG) 
• Compatible with PVST+ 
• RVI (Routed VLAN Interface) 
• Multicast VLAN Registration (MVR) 
• IEEE 802.1ak Multiple VLAN Registration Protocol (MVRP) 
• IEEE 802.1AB: Link Layer Discovery Protocol (LLDP) 
• LLDP-MED with VoIP integration 
• IEEE 802.1D: Spanning Tree Protocol 
• IEEE 802.1p: CoS prioritization 
• IEEE 802.1Q: VLAN tagging 
• IEEE 802.1s: Multiple instances of Spanning Tree Protocol (MSTP) 
• Number of MST instances supported: 64 
• Number of VSTP instances supported: 253 
• IEEE 802.1w: Rapid reconfiguration of Spanning Tree Protocol
• IEEE 802.1X: Port Access Control 
• IEEE 802.1ak: Multiple Registration Protocol 
• IEEE 802.3: 10BASE-T 
• IEEE 802.3u: 100BASE-T 
• IEEE 802.3ab: 1000BASE-T 
• IEEE 802.3z: 1000BASE-X 
• IEEE 802.3ae: 10 Gigabit Ethernet 
• IEEE 802.3af: Power over Ethernet 
• IEEE 802.3x: Pause Frames/Flow Control 
• IEEE 802.3ad: Link Aggregation Control Protocol 
• IEEE 802.3ah: Ethernet in the First Mile 
• Metro 
– PVLAN support 
– IEEE 802.1ag connectivity fault management 
– ITU-T G803.2 
– ITU-T Y.1731 
– IEEE 802.1ad Q-in-Q 
– Multicast VLAN routing
Layer 3 Features: IPv4 • Max number of ARP entries: 16,000 
• Max number of IPv4 unicast routes in hardware: 16,000 
• Max number of IPv4 multicast routes in hardware: 8,000 
• Routing protocols: RIPv1/v2, OSPF, BGP, IS-IS 
• Static routing 
• Routing policy 
• Bidirectional Forwarding Detection 
• Layer 3 redundancy: VRRP 
• IPv4/v6 GRE tunneling
Layer 3 Features: IPv6 • Max number of Neighbor Discovery (ND) entries: 16,000 (shared with IPv4) 
• Max number of IPv6 unicast routes in hardware: 4,000 
• Max number of IPv6 multicast routes in hardware: 2,000 
• Routing protocols: RIPng, OSPFv3, IPv6, ISIS, BGP4+, PIM, MLD, MLDv2 
• Static routing
Access control lists (ACLs) (Junos OS firewall filters) • Port-based ACL (PACL) – Ingress and Egress 
• VLAN-based ACL (VACL) – Ingress and Egress 
• Router-based ACL (RACL) – Ingress and Egress 
• ACL entries (ACE) in hardware per system: 7,000 
• ACL counter for denied packets
• ACL counter for permitted packets 
• Ability to add/remove/change ACL entries in middle of list (ACL editing) 
• Layer 2 – L4 ACL 
• 802.1X port-based 
• 802.1X multiple supplicants 
• 802.1X with VLAN assignment 
• 802.1X with authentication bypass access (based on host MAC address) 
• 802.1X with VoIP VLAN support 
• 802.1X dynamic ACL based on RADIUS attributes 
• 802.1X Supported EAP types: MD5, TLS, TTLS, PEAP 
• TNC certified 
• MAC Authentication (RADIUS) 
• Control Plane DoS protection
Access Security • MAC limiting (per port and per VLAN) 
• Allowed MAC addresses – configurable per port 
• Dynamic ARP inspection (DAI) 
• IP source guard 
• Local proxy ARP 
• Static ARP support 
• DHCP snooping 
• Captive Portal 
• Persistent MAC address configurations 
• DDoS protection (CPU control path flooding protection)
High Availability • Non-Stop Routing (NSR) – PIM, OSPF v2 and v3, RIP v2, RIPnG, BGP, BGPv6, ISIS, IGMP v1, v2, v3 
• Non-Stop Software Upgrade (NSSU) 
• Redundant, hot-swappable power supplies 
• Redundant, field-replaceable, hot-swappable fans 
• Graceful Route Engine Switchover (GRES) for Layer 2 hitless forwarding and Layer 3 protocols on RE failover 
• Graceful protocol restart – OSPF, BGP 
• Layer 2 hitless forwarding on RE failover 
• Online insertion and removal (OIR) uplink module 
• Non-Stop Bridging (NSB) – LACP
Quality of Service (QoS) • Layer 2 QoS 
• Layer 3 QoS 
• Ingress policing: 1 rate 2 color 
• Hardware queues per port: 8 
• Scheduling methods (egress): Strict priority (SP), Shaped Deficit Weighted Round-Robin (SDWRR) 
• 802.1p, DSCP/IP Precedence trust and marking 
• Layer 2-4 classification criteria: Interface, MAC address, Ethertype, 802.1p, VLAN, IP address, DSCP/IP Precedence, TCP/UDP port numbers, etc. 
• Congestion avoidance capabilities: Tail Drop
Multicast • IGMP: v1, v2, v3 
• IGMP snooping 
• PIM-SM, PIM-SSM, PIM-DM
Services and Manageability • Junos OS CLI 
• Web interface 
• Out-of-band management: Serial; 10/100/1000BASE-T Ethernet 
• ASCII configuration 
• Rescue configuration 
• Configuration rollback 
• Image rollback 
• LCD management 
• Element management tools: Network and Security Manager (NSM) 
• Remote performance monitoring 
• Junos SDK 
• Proactive services support via Advanced Insight Solutions (AIS) 
• SNMP: v1, v2c, v3 
• RMON (RFC 2819) Groups 1, 2, 3, 9 
• NTP 
• DHCP server 
• DHCP client and DHCP proxy 
• DHCP relay and helper 
• DHCP local server support 
• RADIUS 
• Service Now for automated fault detection, simplified trouble ticket management and streamlined operations 
• TACACS+ 
• SSHv2 
• Secure copy 
• HTTP/HTTPs 
• DNS resolver 
• Syslog logging 
• Temperature sensor 
• Config-backup via FTP / secure copy 
• Interface range specification 
• Port profile associations

 

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Thiết bị Switch JUNIPER EX4200-24T-TAA”
x