Thiết Bị Switch Cisco SG220-50-K9-EU

Thiết Bị Switch Cisco SG220-50-K9-EU

10,950,000

còn hàng

Mã sản phẩm : SG220-50-K9-EU

Thông số sản phẩm Switch Cisco SG220-50-K9-EU

  • Ports: 48 x 10/100/1000BASE-T
  • Other ports: 2 x Mini-GBIC combo port
  • Managed: Smart management
  • Form factor: Rack-mount

BẢO HÀNH: 12 THÁNG

(*) GIAO HÀNG HỎA TỐC NỘI THÀNH 1 H



Chính sách bán hàng hấp dẫn

📌 Giao hàng miễn phí nội thành TP.HCM.

📌 Miễn phí hướng dẫn, cài đặt thiết bị từ xa.

📌 1 Đổi 1 trong 30 ngày nếu lỗi nhà sản xuất.

📌 Đổi trả bảo hành tận nơi miễn phí TP.HCM.

 


Cam kết bán hàng nổi bật

Cam kết Chính Hãng™ 100%

Cam kết giao hàng Siêu Tốc

Cam kết Hư Gì Đổi Nấy

Chính sách miễn phí nổi bật

Giao hàng nhanh 3-4h miễn phí

Đổi trả bảo hành tận nơi miễn phí

Cấu hình từ xa miễn phí

1 ĐỔI 1 trong 01 tháng miễn phí

Mô tả

Switch Cisco SG220-50-K9-EU là bộ Switch trong dòng Series 220 của Cisco, được thiết kế để đáp ứng nhu cầu sử dụng và mở rộng của các doanh nghiệp vừa và nhỏ, đồng thời cân bằng giữa chi phí và hiệu năng hoạt động.

Với các bộ Switch Cisco SG220-50-K9-EU của Cisco, bạn sẽ được hỗ trợ đầy đủ tính năng dành riêng cho doanh nghiệp về cả khả năng quản lý mạng cũng như bảo mật phù hợp với nhu cầu sử dụng mà không cần chi trả quá nhiều cho các tính năng không cần thiết.

Switch Cisco SG220-50-K9-EU 48 10/100/1000 ports + 2 Gigabit

Thiết bị chuyển mạch Cisco SG220-50-K9-EU

Switch Cisco SG220-50-K9-EU thuộc dòng sản phẩm Cisco Small Business 220 Series. Switch Cisco SG220-50-K9-EU được thiết kế để hoạt động ở layer 2 trong mô hình OSI. Switch Cisco SG220-50-K9-EU cung cấp 48 10/100/1000 ports, 2 Gigabit RJ45/SFP combo cho các kết nối LAN tại các doanh nghiệp vừa và nhỏ.

Chúng ta có thể sử dụng Switch Cisco SG220-50-K9-EU để kết nối các máy tính, máy in, camera hoăc các thiết bị wifi trong 1 phòng ban, trong các doanh nghiệp nhỏ với số lượng user ít… hoặc sử dụng để mở rộng mạng LAN trong các doanh nghiệp.

Thiết bị mạng Switch Cisco SG220-50-K9-EU tự động chuyển chế độ cáp thẳng hoặc chéo (MDI/MDI-X). Các tính năng Address Learning and Aging, and Data Flow Control giúp tối ưu truyền dữ liệu. Thiết kế để bàn hoặc bắt Rack.

 Cisco SG220-50-K9-EU 48 x 10/100/1000Mbps

Các tính năng mới của Switch Cisco SG220-50-K9-EU

  • Simple and flexible management
  • Power over Ethernet Plus
  • A higher level of security and intelligence
  • Easy configuration and deployment
  • Flexible network management capabilities
  • Reliability and performance
  • Network security
  • IP telephony support
  • Optimal energy efficiency
  • Peace of mind and investment protection
  • Limited lifetime hardware warranty
  • World-class support

Tham khảo thêm sản phẩm Switch Ciscotại đây

|| Bạn đang cần tư vấn giải pháp và thiết bị mạng phù hợp. Đừng ngại liên hệ ngay cho NetworkPro:

HOTLINE0909 06 59 69.

Thông số kỹ thuật của Switch Cisco SG220-50-K9-EU

General Information
Product Name SG220-50-K9-EU  48 10/100/1000 ports Smart Switch
Manufacturer Part Number SG220-50-K9-EU
Product Line Smart Plus
Product Series 220
Product Model SG220-50
Product Type Ethernet Switch
Interfaces/Ports
Total Number of Network Ports 48
Uplink Port Yes
Modular No
Stack Port No
Port / Expansion Slot Details

48 10/100/1000 ports

2 Gigabit RJ45/SFP combo port

Performance
Forwarding rate in millions of packets per second (mpps; 64-byte packets) 74.40
Switching capacity in Gigabits per second 100
Hardware
Buttons Reset button
Cabling type

Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5

Ethernet or better for 1000BASE-T

LEDs System, Link/Act, Speed
Flash 32 MB
CPU memory 128 MB
Packet buffer 12 Mb
Environmental
Dimensions (W x H x D) 440 x 44 x 201 mm
Unit weight 3.3 kg
Power 100-240 V, 50-60 Hz, Internal
Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick
Operating temperature 0-50° C
Storage temperature -20° C to +70° C
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 90%, relative, noncondensing
Green power (mode) EEE + Energy Detect
System power consumption

110V=36.6W

220V=39.9W

Power consumption (with PoE)

N/A

Heat dissipation (BTU/hr)

124.9

Fan (number)

1 pcs/6300 rpm

No fan speed control

Acoustic noise

40.3dB

MTBF @ 50°C (hours)

382,742

Package contents
Package contents
–  Cisco 220 Series Ethernet switch
–  Power cord
–  Mounting kit included in all SKUs
–  Console cable
–  Quick start guide

Các tính năng của Switch Cisco SG220-50-K9-EU

Layer 2 switching

MAC table

Up to 8,192 MAC addresses

Spanning Tree Protocol (STP)

Standard 802.1d Spanning Tree support, enabled by default

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])

Multiple Spanning Tree instances using 802.1s (MSTP)

16 instances are supported

Port grouping

Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

–  Up to 8 groups
–  Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation

Load balance based on source and destination MAC address, or source and destination MAC/IP

VLAN

Support for up to 256 VLANs simultaneously

Port-based and 802.1Q tag-based VLANs

Management VLAN

Guest VLAN

Auto voice VLAN

Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS

QinQ VLAN

VLANs transparently cross a service provider network while isolating traffic among customers

Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)

Protocols for automatically propagating and configuring VLANs in a bridged domain

Head-Of-Line (HOL) blocking

HOL blocking prevention

Jumbo frame

Frame sizes up to 9216 supported

Loopback detection

Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.

Automatic Media-Dependent Interface Crossover (MDIX)

Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.

Security

ACLs

Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag

Support up to 512 rules

Port security

Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses

IEEE 802.1X (authenticator role)

802.1X: RADIUS authentication; guest VLAN;

Single-host, multiple-host, and multisession mode

RADIUS, TACACS+

Supports RADIUS and TACACS authentication; switch functions as a client

MAC address filtering

Supported

Storm control

Broadcast, multicast, and unknown unicast

DoS protection

DOS attack prevention

STP Bridge Protocol Data Unit (BPDU) Guard

This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port

Spanning Tree Loop Guard

This feature provides additional protection against Layer 2 forwarding loops (STP loops).

Secure Shell (SSH) Protocol

SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported

Secure Sockets Layer (SSL)

SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch

QoS

Priority levels

8 hardware queues per port

Scheduling

Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)

Class of service

Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS

Rate limiting

Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based

Congestion avoidance

A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization

Các loại Module quang Cisco sử dụng cho Switch Cisco SG220-50-K9-EU

pported SFP/SFP+ modules SKU Media Speed Maximum Distance
MGBBX1 Single-mode fiber 1000 Mbps 10 km
MGBSX1 Multimode fiber 1000 Mbps 500 m
MGBLH1 Single-mode fiber 1000 Mbps 40 km
MGBLX1 Single-mode fiber 1000 Mbps 10 km
MGBT1 UTP cat 5e 1000 Mbps 100 m
MFEFX1 Multimode fiber 100 Mbps 10 km
MFELX1 Single-mode fiber 100 Mbps 20 km

 

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Thiết Bị Switch Cisco SG220-50-K9-EU”
x