Switch HPE JG961A OfficeConnect 1950 48G 2SFP+ 2XGT

Switch HPE JG961A OfficeConnect 1950 48G 2SFP+ 2XGT

còn hàng

Mã sản phẩm : JG961A

Thông số sản phẩm: HPE 1950 48G 2SFP+ 2XGT Switch

  • Thiết bị chuyển mạch HPE JG961A được thiết kế để hoạt động phù hợp với lớp Accees (lớp truy nhập mạng đầu cuối) với chi phí đầu tư là thấp trong dòng HPE OfficeConnect 1950 Switch Series.
  • Thiết bị chuyển mạch HPE JG961A được tăng cường bảo mật bằng cách sử dụng các công nghệ virtual LANs, link aggregation, hoặc IGMP Snooping boost uplink performance, và loop prevention enhances network reliability.
  • Switch HPE JG961A ​ sử dụng điện AC 220V.

BẢO HÀNH: 12 THÁNG

(*) GIAO HÀNG HỎA TỐC NỘI THÀNH 1H



Mô tả

Thiết bị chuyển mạch HPE 1950 48G 2SFP+ 2XGT JG961A được thiết kế để hoạt động phù hợp với lớp Accees (lớp truy nhập mạng đầu cuối) với chi phí đầu tư là thấp trong dòng HPE OfficeConnect 1950 Switch Series. Thiết bị chuyển mạch HPE JG961A được tăng cường bảo mật bằng cách sử dụng các công nghệ virtual LANs, link aggregation, hoặc IGMP Snooping boost uplink performance, và loop prevention enhances network reliability. Switch HPE JG961A ​ sử dụng điện AC 220V.

Thiết bị chuyển mạch HPE JG961A cho phép dễ dàng quản lý ngay cả bởi người dùng không biết kỹ thuật thông qua giao diện Wed trực quan, hỗ trợ HTTP và HTTP Secure (HTTPS)

Thiết bị chuyển mạch HPE JG961A được thiết kế theo chuẩn EIA 1U phù hợp với tất cả các loại tủ rack hoặc gắn trên tường.

|| Bạn đang cần tư vấn giải pháp và thiết bị mạng phù hợp. Đừng ngại liên hệ ngay cho NetworkPro:

HOTLINE: 0908 314 585

Thông số kỹ thuật HPE 1950 48G 2SFP+ 2XGT (JG961A)

I/O ports and slots 48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

2 SFP+ fixed 1000/10000 SFP+ ports

2 RJ-45 1/10GBASE-T ports

Additional ports and slots 1 RJ-45 console port to access limited CLI port
Physical characteristics Dimensions: 17.32(w) x 10.63(d) x 1.73(h) in (44 x 27 x 4.4 cm) (1U height)
Weight: 11.02 lb (5 kg)
Memory and processor 128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure wall, desktop and under table mounting
Performance 100 Mb Latency < 5 µs
1000 Mb Latency < 5 µs
10 Gbps Latency: < 1.5 µs
ThrougHPEut up to 130.9 Mpps (64-byte packets)
Switching capacity: 176 Gbps
MAC address table size: 16384 entries
Environment Operating temperature: 32°F to 104°F (0°C to 40°C)
Operating relative humidity: 5% to 95%, noncondensing
Nonoperating/Storage temperature:-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity:15% to 95% @ 140°F (60°C)
Altitude: up to 16,404 ft (5 km)
Acoustic: ISO 7779
Electrical characteristics Frequency: 50/60 Hz
Voltage: 100 – 240 VAC, rated
Maximum power rating: 54 W
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical : maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated
Safety UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP manager; HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to documentation for MIB support details.

Các loại Module quang HPE được sử dụng cho switch HPE JG961A:

J4858C HPE X121 1G SFP LC SX Transceiver

J4859C HPE X121 1G SFP LC LX Transceiver

J8177C HPE X121 1G SFP RJ45 T Transceiver

JD118B HPE X120 1G SFP LC SX Transceiver

JD119B HPE X120 1G SFP LC LX Transceiver

JD089B HPE X120 1G SFP RJ45 T Transceiver

JD092B HPE X130 10G SFP+ LC SR Transceiver

JD094B HPE X130 10G SFP+ LC LR Transceiver

J9150A HPE X132 10G SFP+ LC SR Transceiver

J9151A HPE X132 10G SFP+ LC LR Transceiver

Các loại Cable HPE DAC – Direct Attack Copper sử dụng cho switch HPE JG961A:

JD095C HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD096C HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD097C HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JG081C HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

Các loại nguồn HPE power supply dùng cho switch HPE JG961A:

JG136A HPE RPS1600 Redundant Power System

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Switch HPE JG961A OfficeConnect 1950 48G 2SFP+ 2XGT”
x